3M Replacement Cartridges

Product Details:

Product Details:

• Reduces sediment1 and scale1
• Average cartridge life: 6 months (incoming water quality may affect cartridge life)
• Proprietary polypropylene manufacturing process
• Grooved surface increases total surface area for longer cartridge life compared than non-grooved filter cartridges
• Rigid construction helps to eliminate sediment “unloading” due to variances in water pressure
• Materials are FDA CFR-21 compliant*

The 3M™ Aqua-Pure™ Whole House Standard Diameter Water Filter Drop-in Replacement Cartridge AP420 for the AP100 & standard and large diameter Stainless Steel Housing Series, is a good choice in water filtration. This standard 2.75” diameter by 9.8” length drop-in cartridge is manufacturer tested and verified to reduce sediment down to 5 micron nominal.

The 3M™ Aqua-Pure™ Whole House Standard Diameter Water Filter Drop-in Replacement Cartridge AP420 for the AP100 & standard and large diameter Stainless Steel Housing Series, is a great choice in water filtration. This standard 2.75" diameter drop-in cartridge is manufacturer tested and verified to reduce sediment** down to 5 micron nominal, as well as scale**. Our dual purpose replacement cartridge, the AP420's rigid construction from our proprietary polypropylene manufacturing process, helps to eliminate "unloading" of sediment due to variances in water pressure, sometimes referred to as water hammer. The scale inhibition media helps prevent scale build-up on water heaters (both standard and tankless styles), as well as down-stream plumbing fixtures.

Additional features and specifications include:

• 5 micron nominal
• Flow Rate: 10 gpm/37.9 gpm (housing dependent)
• Average life: 6 months (incoming water quality may affect cartridge life)
• 2.75 in/7 cm by 9.8 in/24.9 cm
• 25-125 psi/172-862 kPa pressure range
• 40-100°F/4.4-37.8°C temperature range

To maximize system performance and efficiency, regularly scheduled maintenance including replacement of the filter cartridges at the required interval, at the rated capacity, or sooner if a reduction in water flow occurs is required. Filter life is dependent on actual use and incoming water quality.

Excellence in Filtration Technology:
3M branded water filtration products have been addressing water quality issues for over 50 years. 3M products offer a wide range of solutions designed to address many types of water quality concerns. Third-party certifications, such as NSF and WQA, are an advantage provided on many 3M water quality improvement solutions. 3M, a household brand name, is a known leader in filtration technology recognized for innovation, trust and quality around the world.

Having clean and clear drinking water in your home is both a pleasure and a reassurance that you're giving your family the best. With a water filtration system from 3M Purification, you can provide filtered drinking water for every member of your family. From whole home water filtration to drinking water systems, look to 3M Purification to help you find the right solution.

Additional Information:

• Item Code: AP420

Product Details:

Product Details:

• Reduces sediment for cleaner and clearer water
• Grooved surface increases total surface area for longer cartridge life as compared to 3M non-grooved surface cartridges
• Rigid construction helps to reduce sediment “unloading” due to variances in water pressure

The 3M™ Aqua-Pure™ Whole House Large Sump Replacement Water Filter Drop-in Cartridge AP810-2 is a great choice in water filtration. This standard 4.5” diameter by 20” length drop-in cartridge is manufacturer tested and verified to reduce sediment down to 5 micron nominal1. It’s ideal for larger homes with at least 2.5 bathrooms. 1 As tested and verified by manufacturer’s laboratory.

The 3M™ Aqua-Pure Whole House Large Sump Replacement Water Filter Drop-in Cartridge AP810 -2 is a standard 4.5" diameter drop-in cartridge that is manufacturer tested and verified to reduce sediment down to 5 micron nominal1. Its rigid construction from our polypropylene manufacturing process, helps to capture and retain sediment from within your water. With these features, AP810-2 is a great choice in water filtration. It's ideal for larger homes with at least 2.5 bathrooms.

Features include:

• Flow rate up to 45 gpm/170.3 lpm (housing dependent)
• 6 months (varies depending on local water quality)
• 4.5 in/11.4 cm by 20 in/50.8 cm
• 25-125 psi/172-862 kPa pressure range
• 40-100°F/4.4-37.8°C temperature ranges

To maximize system performance and efficiency, regularly scheduled maintenance including replacement of the filter cartridges at the required interval, at the rated capacity, or sooner if a reduction in water flow occurs is required. Filter life is dependent on actual use and incoming water quality.

Additional Information:

• Item Code: AP802
• Delivery Time: Immediately

Product Details:

Product Details:
The 3M™ Aqua-Pure™ Whole House Water Filtration System Replacement water filter cartridge for standard diameter housings. Reduces sediment.

The Aqua-Pure™ Whole House Water Filtration System Replacement Cartridge reduces rust and fine particulate in the water used throughout your home.

• Helps reduce sediment.
• Grooved surface increases total surface area for longer cartridge life as compared to 3M non-grooved surface cartridges
• Rigid construction helps to reduce sediment ‘unloading’ due to variances in water pressure

Suggested Applications:

• Use to capture and retain sediment from within your water system

Product Details:

Product SKU : IAS802C
Whole House Chlorine Removal Systems
It removes the chlorine taste and odour from your water to give you better quality water throughout the house. It is perfect solution to bad looking and bad tasting water
* Chlorine Taste and odour Removal
* Filtration
* Unique Sequestering Technology
* Zero Wastage of Water
* No Electricity Required
* Minimal maintenance

Specifications
Catridge : IAC817-2
Cartridge Inclusion : Yes
Max. Temperature (Deg C) : 37.8
Pressure Range (Bar) : 1.5 - 6.9
Max. Flow Rate (Ipm) : 75
Connection Size (NPT) : 1"
Micron Rating : 25

3M™ Chlorine Removal System is a whole house water filtration system which provides multiple benefits in one system - Chlorine Removal, Filtration and Scale Prevention. Installed at the entry of the house, it provides quality water throughout the house, without any electricity consumption and any water wastage.

Additional Information:

• Item Code: IAC817-2
• Delivery Time: Immediately

Product Details:

Specifications/Additional Details

• Usage/Application: Whole House Chlorine Removal Systems
• Material: Plastic
• Micron ratings: 25
• Filter Type: Quick Change Cartridge
• Brand: 3M
• Automatic Grade: Automatic

Additional Information:

• Delivery Time: immediately

Product Details:

Product Details:

• Polyphosphates, included in this product, help to inhibit scale build-up in water heaters (both standard and tank-less styles) and in appliances such as dishwashers and clothes washers which can help extend the life of hot water-using appliances
• Scale inhibition helps protect pipes from corrosion
• Easy cartridge change-out helps provide easy system maintenance
• FDA CFR-21 compliant materials*

The 3M™ Aqua-Pure™ Whole House Scale Inhibition Replacement Water Treatment Cartridge AP431 for the AP430SS was designed to reduce scale build-up on hot water-using appliances such as water heaters (standard and tank-less), clothes washers and dishwashing machines, and on plumbing fixtures like faucets, pipes, and shower heads. The AP431 is as easy to change-out as a light bulb.

The 3M™ Aqua-Pure™ Whole House Scale Inhibition Replacement Water Treatment Cartridge AP431 for the AP430SS contains polyphosphates to bind calcium and magnesium hardness minerals, preventing them from precipitating out (or becoming a solid) and building up on metallic surfaces such as water heaters and plumbing fixtures like faucets, pipes and shower heads.

Features include:

• Flow rates up to 10 gpm/37.9 lpm
• 25 - 125 psi/172 - 862 kPa pressure range
• 40 - 100°F/37.8°C temperature range
• System materials are FDA CFR-21 compliant*

The overall design of our 3M™ Aqua-Pure™ AP430SS whole house scale inhibition water treatment system makes the 3M™ Aqua-Pure™ AP431 cartridge change-out easy for professionals, as well as end users. The 3M™ Aqua-Pure™ AP431 Whole House Scale Inhibition Replacement Cartridge is as easy to change-out as a light bulb. The scale inhibition system helps extend the life of downstream water-using appliances such as water heaters (standard and tank-less), clothes washers and dishwashing machines, as well as plumbing fixtures like faucets, pipes and shower heads by reducing scale build-up and corrosion.

How It Works:
Polyphosphates in minute concentrations of 2-3 ppm, effectively help prevent scale build-up by inhibiting the deposition of hardness minerals onto metallic surfaces. Polyphosphates also helps prevent corrosion by forming a thin protective layer on the metal surface. The 3M™ Aqua-Pure™ AP431 Scale Inhibition Replacement Cartridge is manufactured using FDA CFR-21 compliant materials* and is suitable for drinking and cooking water, and food applications.

Additional Information:

• Item Code: AP431
• Delivery Time: 2 days from ordered